For new tradespeople

Price, Estimate, and Invoice Your First Trade Job

Whether you are considering training, enrolled now, or ready to work, your first paid job is where the business side starts: a price you can defend, an estimate the client signs, a deposit, an invoice, and the money in your account. This guide walks through each step for electrical, plumbing, HVAC, carpentry, construction, and property maintenance work.

Free plan: 5 estimates and 25 invoices a month, your logo, sales tax, and discounts. No card.

One job, start to finishWater heater replacementResidential client
Copperline PlumbingCopperline PlumbingFictional example business
01EstimateSent: 4 lines, exclusions, deposit terms$1,840.00
02SignatureSigned by the client on screen
03DepositDeposit invoice paid$460.00
04InvoiceConverted; balance after deposit$1,380.00
05PaidRemaining balance recorded$1,380.00
Job total$1,840.00

Example figures for a fictional business, not a rate guide.

The short answer

To get paid for your first trade job: work out your price from labor, materials, and job costs; send a written estimate with the scope, line items, exclusions, and deposit terms; get the client to sign it; agree when any deposit is due, after checking the rules in your state; turn the estimate into an invoice when the work is done; and record the payment when it arrives.

Checklist

Your first paid job checklist

Five steps, in the order they happen. Each one says what to do and how it works in Invoice My Clients.

  1. 01

    Estimate

    Write down exactly what you will do, with one line per task, part, or fee. Say what is not included (patching, painting, haul-away, permits if the client pulls them) and how long the price holds.

    In Invoice My Clients

    Create an estimate with line items, sections, and a pricing table. Free includes 5 new estimates a month; Starter is unlimited.

  2. 02

    Deposit

    Decide the deposit before you send the estimate, and write it into the terms with when it is due. A deposit can help cover upfront costs, subject to your agreement and applicable law. Some states limit deposits on home improvement work, so check your state contractor or licensing board first.

    In Invoice My Clients

    Add a deposit to the estimate. On Free, an accepted estimate's deposit is requested as a deposit invoice: collect the payment outside Invoice My Clients and record it. Paying the deposit online through Invoice My Clients needs a paid plan.

  3. 03

    Signature

    Agree on the scope and payment terms before you start. A signed estimate is the clearest record of that agreement, and it is what you point to if the job grows.

    In Invoice My Clients

    The client opens the estimate from the email you send and signs it on screen. On the Android app they can also sign with a finger, in person.

  4. 04

    Invoice

    When the work is done, invoice the same lines you estimated, plus anything the client approved along the way. Put a due date on it, and the deposit you already collected comes off the total.

    In Invoice My Clients

    Convert the accepted estimate into an invoice in one step. The deposit is credited on it, and your logo, sales tax, and discounts are on every plan.

  5. 05

    Get paid

    Send the invoice the day you finish, while the work is fresh. Record every payment, and follow up the day after the due date if nothing has arrived.

    In Invoice My Clients

    On Free, record payments you receive offline and add 1 payment QR code (Venmo, Cash App, or Zelle). Starter ($15/month) adds a View and pay link for card payments, partial payments, and automatic reminders after the due date.

Pricing your work

There is no single right rate for a new tradesperson; it depends on your trade, your market, and your costs. What every price needs is the same four parts:

Labor
Hours on the job times an hourly rate that covers your pay, taxes, insurance, tools, vehicle, and the hours you spend quoting and driving that nobody pays for.
Materials
What the parts cost you, plus a markup for picking them up, storing them, and standing behind them.
Job costs
Permits, inspections, disposal, equipment rental, and travel, each on its own line so the client sees them.
Margin
The share of the price left after the costs in your calculation. Count labor, materials, and overhead once, then check that the price leaves the profit you intended. Profit pays for callbacks, slow months, and growth.

If the total feels high, do not cut the margin first. Look at the scope: a smaller first phase, or an option the client can choose, often works better than a lower rate.

Free calculators for pricing

By trade

The steps are the same in every trade. What changes is what goes on the estimate. Appliance repair and other service work follow the same pattern as plumbing and HVAC: a service call, the repair, and the parts.

Before taking independent work, check your state and local licensing, permit, insurance, and supervision requirements. Training alone may not authorize you to perform every job independently.

Plumbing

Keep the trip or diagnostic charge separate from the repair, and name the fixture or water heater by make and size. Put after-hours rates in writing before the call, not after.

Typical estimate linesCopperline PlumbingCopperline PlumbingFictional example business
  • 01Trip charge
  • 02Replace 50-gallon water heater, labor
  • 03Water heater, fittings, and venting
  • 04Haul-away of old unit

HVAC

Separate equipment, labor, and refrigerant, and note the equipment model and who registers the manufacturer warranty. Maintenance visits suit a simple fixed price per visit.

Typical estimate linesBluefield Heating & CoolingBluefield Heating & CoolingFictional example business
  • 01Diagnostic visit
  • 02Replace condenser fan motor, labor
  • 03Fan motor and capacitor
  • 04Refrigerant, per pound

Carpentry, construction, and masonry

Bigger jobs run longer, so agree the payment schedule up front: a deposit, then payments at clear milestones. When the client asks for more, write it down and get it signed before you do it.

Progress billing in Invoice My Clients is on Professional and above. On Free or Starter, invoice each stage separately and keep track of earlier payments yourself.

Typical estimate linesGrainline RenovationsGrainline RenovationsFictional example business
  • 01Demolition and disposal
  • 02Frame and hang interior door, labor
  • 03Lumber, trim, and hardware
  • 04Final payment on completion

Property maintenance and handyman work

Many small tasks on one visit: give each its own line so the client sees where the time went. A minimum charge per visit keeps short calls worth the drive, and keep the receipts for any materials you buy.

Typical estimate lines
  • 01Minimum service charge
  • 02Repair fence gate and latch
  • 03Replace two exterior light fixtures
  • 04Materials, at cost plus markup

Training resources: the Lowe's Foundation Gable Grants

If you are looking for training, or you trained through a funded program, this is what the Lowe's Foundation publishes about its Gable Grants program. We summarize it here only to point you to the source.

  • The Foundation says its Gable Grants program is a $250 million commitment to train and develop 250,000 skilled tradespeople by 2035. [1]
  • Gable Grants go to organizations: community and technical colleges, community-based nonprofit organizations, and national nonprofit organizations. [2]
  • The FAQs say funded programs put an emphasis on facilities and property maintenance; carpentry, construction, and masonry; electrical; and HVAC and/or plumbing. [3]
  • The grants support organizations, not individuals: colleges apply directly and nonprofits by invitation. Funded programs recruit and train people directly, and community-based nonprofits must offer their training at no cost to participants. [3]
  • The Foundation's Get Started page points people to CareerStarter, a free resource from its partnership with the National Center for Construction Education and Research (NCCER), to explore the trades and find schools, training programs, and jobs. [4]

For eligibility, start dates, or anything about a specific program, contact the college or nonprofit that runs it, or check the Foundation site.

Invoice My Clients is not affiliated with, endorsed by, or sponsored by Lowe's or the Lowe's Foundation. Lowe's is a trademark of its owner.

Sources

  1. [1] Lowe's Foundation home page, https://www.lowesfoundation.org/, read November 21, 2026
  2. [2] Gable Grants program page, https://www.lowesfoundation.org/gable-grants, read November 21, 2026
  3. [3] Gable Grants FAQs, https://www.lowesfoundation.org/gable-grants/faqs, read November 21, 2026
  4. [4] Get Started page, https://www.lowesfoundation.org/get-started, read November 21, 2026

What is free, and what Starter adds

You can run your first jobs on the Free plan. Starter is $15 a month when you need more, or want clients to pay by card.

FeatureFreeStarter · $15
Invoices per month25Unlimited
Estimates per month5Unlimited
Active clients5Unlimited
Pricing tables, sections, e-signaturesIncludedIncluded
Convert estimate to invoiceIncludedIncluded
Your logo on invoices, estimates, & every documentIncludedIncluded
Sales taxIncludedIncluded
DiscountsIncludedIncluded
View and pay link in the sent email or textNot includedIncluded
Partial paymentsNot includedIncluded
Automatic payment reminders (after the due date)Not includedIncluded

From the same plan data as the pricing page. Card payments run through Stripe. See all plans

FAQ

Questions from new tradespeople

Is Invoice My Clients part of the Lowe's Foundation or its Gable Grants program?+

No. Invoice My Clients is not affiliated with, endorsed by, or sponsored by Lowe's or the Lowe's Foundation. Lowe's is a trademark of its owner. This guide is for anyone starting out in the trades, whatever program they trained in.

Can I apply for a Gable Grant myself?+

According to the Lowe's Foundation Gable Grants FAQs (read November 21, 2026), the grants go to organizations, not individuals: community and technical colleges and nonprofits. To train in a funded program, contact the college or nonprofit, or use the Foundation's Get Started page.

What should my first estimate include?+

Your business name and logo, the client and job address, one line per task, part, or fee, what is not included, the deposit and payment terms, how long the price holds, and a place for the client to sign.

How much deposit should I ask for?+

Enough to cover the materials you buy for the job is a common starting point, but the rules vary: some states limit deposits on home improvement work. Check your state contractor or licensing board, then use the deposit calculator to work out the amount and the balance.

Is Invoice My Clients free?+

Yes, there is a Free plan: 25 invoices and 5 estimates a month, up to 5 active clients, e-signatures, your logo, sales tax, and discounts. On Free, clients pay offline and you record it. Starter is $15 a month for unlimited invoices and estimates, card payments through the View and pay link, and automatic reminders after the due date.

Can I send estimates from my phone?+

Yes. Use the web app in your phone browser, or download the Android app from Google Play, which handles estimates, deposits, in-person signatures, and invoices. Invoice My Clients supports English and Spanish.

Is it in Spanish?+

Yes. The site, the web app, and the Android app are in English and Spanish, and you can send estimates and invoices to Spanish-speaking clients.

Send your first estimate today

Free plan, no card. Your logo on every estimate and invoice from day one.

Invoice My Clients is not affiliated with, endorsed by, or sponsored by Lowe's or the Lowe's Foundation. Lowe's is a trademark of its owner.